- الرئيسية
- عن الجامعة
- سماح بوبكر معتوق
سماح بوبكر معتوق
- Fashion design using KALEDO software.
- Fashion design using LECTRA MODARIS system software.
- Fashion design using CLO3D software.
-
Assistant Professor of Higher Education since 2011 in the Higher Institute of Technological Studies.
-
Assistant Professor, Department of Fashion and Textile Design, Faculty of Art and Design, University of Tabuk, on February 8, 2021.
-
Supervisor of measurement and evaluation unit for the College of Art and Designs since 2022. Supervisor of the laboratories of the Fashion and Textiles Design Department since 2022.
-
Head of the Laboratories Committee of the College of Art and Designs 2023.
o Member of the Programs and Plans Committee of the Fashion and Textile Design Department since 2022.
Member of the Scientific Research Committee of the Fashion and Textile Design Department since 2022.
1- National diploma in textile engineering from national college of engineers. Monastir Tunisia (2002).
2- Master’s degree in textile engineering from national college of engineers. Monastir Tunisia (2004).
3- PhD in textile engineering from national college of engineers. Monastir Tunisia (2010).
|
8 - 9 |
9 - 10 |
10 - 11 |
11 – 12 |
12 - 1 |
1 – 2 |
2 - 3 |
3 – 4 |
4 - 5 |
|
5 - 6 |
|
|
الأحد |
تصميم رقمي 2 601 53-0-27-1 |
تصميم رقمي 2 602 53-0-27-1 |
ساعة ارشادية |
اعداد النماذج الرقمية 603 53-0-27-1 |
|
|
|
|
|||
|
الاثنين |
اعداد النماذج الرقمية 502 48-0-27-1 |
ساعة ارشادية |
سيكولوجية الأزياء 46-1-27-1 |
ساعة مكتبية |
|
|
|
|
|
||
|
الثلاثاء |
تصميم رقمي 2 601 53-0-27-1 |
تصميم رقمي 2 602 53-0-27-1 |
|
اعداد النماذج الرقمية 603 53-0-27-1 |
|
|
|
|
|||
|
الأربعاء |
اعداد النماذج الرقمية 502 48-0-27-1 |
سيكولوجية الأزياء 46-1-27-1 |
ساعة مكتبية |
|
|
|
|
|
|||
|
الخميس |
تصميم رقمي 2 601 53-0-27-1 |
تصميم رقمي 2 602 53-0-27-1 |
|
|
|
|
|
|
|
||
A lubricated stagnation point flow of nanofluid with heat and mass transfer phenomenon: Significance to hydraulic systems
Bioconvective Homann flow of tangent hyperbolic nanofluid due to spiraling disk with convective and zero mas flux constraints
Controlled synthesis of Ti-Doped ZnO/rGO nanocomposites for textile wastewater photocatalysis
Design and Development of V2O5/Reduced Graphene Oxide Nanocomposites for High-Performance Zinc-Ion Batteries
Fractional computations for free convective flow of Casson-hybrid nanofluid flow with sodium alginate and water as based materials
Multiobjective Optimization of Hydrophobic Process for Performance Analysis of Cover Date Bunch
Novel composite materials H2V3O8/PEDOT:PSS as a promising cathode material for rechargeable lithium–ion batteries
Performance Evaluation of the Sizing of Cotton Warp Yarns Using Low-Cost Carboxymethyl Cellulose Derived from Saudi Wheat Straw
Pulsating multiple nano-jet impingement cooling system design by using different nanofluids for photovoltaic (PV) thermal management
The effect of size concentration, lubricant and plasticizer agents contents on cold sizing process performance of cotton warp yarns: modelling and optimization studies
Variable chemical species and thermo-diffusion Darcy–Forchheimer squeezed flow of Jeffrey nanofluid in horizontal channel with viscous dissipation effects
Analyzing the Influence of Sizing Machine Settings on the Performance of the Sized Cotton Warp Yarns Using Eco-Friendly Carboxymethyl Cellulose from Saudi Wheat Straw
-
Haifa Al-Temani, Samah Maatoug, Ali Moulahi, Elham Abu Nab, and Raseel Al-Shehri. Controlled synthesis of Ti-Doped ZnO/rGO nanocomposites for textile wastewater photocatalysis. Journal of Sol-Gel Science and Technology. 2025
-
Thamer A. Albalwi, Ali Moulahi, Samah Maatoug, Mohamed Abdelfattah Ibrahim, Mohamed A. O. Madani & Sahr A. Alsherari. Design and Development of V2O5/Reduced Graphene Oxide Nanocomposites for High-Performance Zinc-Ion Batteries. Journal of Inorganic and Organometallic Polymers and Materials. 2025
-
Samah MAATOUG, Ali Moulahi, Naseem Bazuhair, Shatha Alqarni, Fatih Selimefendigil, Walid Aich, Lioua Kolsi, Abdallah Mhimid. Pulsating multiple nano-jet impingement cooling system design by using different nanofluids for photovoltaic (PV) thermal management. Journal of Case Studies in Thermal Engineering ;Volume 41, January 2023
- Ali Moulahi, Samah MAATOUG, Fatma Janene, Ibrahim Nasroui, Sahr A. Alsherari, Mohamed Abdefattah Ibrahim, Abdulhadi H. Al-Marri, Jamel Derbali, Hassouna Dhaouadi, Ibrahim Alnhas, Nouredine Raoufi, and Abdullah Alfurshuti. Novel composite materials H2V3O8/PEDOT:PSS as a promising cathode material for rechargeable lithium–ion batteries, Journal of Materials Science 58(10), 1-11, February 2023
-
2015-2019: supervisor of a research project PhD thesis : “Development of a new cold sizing process for cotton warps: formulation and feasibility study” .
-
2015-2019: supervisor of a research project PhD thesis: “Valorisation of a biomaterial for the synthesis of carboxymethyl cellulose used to glue textile fibers: the case of wheat straws”
