Mechanical Engineering

Bachelor's

Faculty of Engineering

A distinguished and pioneering ME program locally and internationally in the field of Mechanical engineering education, innovative research, and building a knowledge society.

Duration Semesters

Total Credit Hours

164

Fees

Free

Active Students

Graduated Students

الخطة الدراسية

شروط القبول

University Requirements:

• The applicant must be a Saudi citizen or have a Saudi mother.

• The applicant must hold a high school completion certificate (or its equivalent) from within or outside the Kingdom.

• If the high school certificate was issued outside the Kingdom, it must be officially equivalized by the Equivalency Committee at the Ministry of Education.

• The applicant must have completed high school through full-time study.

• The high school certificate must not be more than five years old, taking into account the specific requirements for health-related majors.

• The applicant must not be older than 25 years.

• The minimum score for the General Aptitude Test must be 50% (the available score during the application period will be considered).

• The minimum score for the Achievement Test must be 50% (the available score during the application period will be considered).

• The validity period of the General Aptitude Test and the Achievement Test results is five years.

• The applicant must not have an academic record at the University of Tabuk during the last four academic semesters.

• The applicant must not have been academically or disciplinarily dismissed from the University of Tabuk or any other university.

• The applicant must not be accepted or enrolled in the same academic degree or any other academic degree at the University of Tabuk or any other university.

• The applicant is responsible for the accuracy of the submitted information. Admission will be considered void in case of any discrepancies.

• The applicant is responsible for following the admission procedures through the university’s official website and social media channels.

Program Requirements:

• The applicant must hold a high school certificate (Science track).

• The applicant must meet the required weighted cumulative GPA for admission criteria.

• The weighted cumulative GPA is calculated as follows:
• 30%: Saudi High School Certificate
• 30%: General Aptitude Test
• 40%: Achievement Test

• Applicants compete for available seats based on their weighted cumulative GPA, calculated as follows:

Weighted Cumulative GPA =
(High School Certificate Score × 30%) +
(General Aptitude Test Score × 30%) +
(Achievement Test Score × 40%)

For more information, please review the admission requirements on the Deanship of Admission and Registration page at:
https://www.ut.edu.sa/deanship-of-admission-and-registration

Objectives

Program Mission:

The mission of the Department of Mechanical Engineering which stems from the mission of the Faculty of Engineering of Tabuk University is to provide high quality education in mechanical engineering to be professionally equipped engineers in the fields of Energy and Thermo-Fluid Engineering, Mechanical Systems and Design, Engineering Materials and Manufacturing, and Mechatronics and Controls, and promotes excellence, ethics and welfare of society.

Program Goals:

1.    Deliver outstanding academic mechanical engineering education aligned with job market demands.
2.    Pioneer research to enrich the knowledge and economy base in mechanical engineering.
3.    Promote sustainability and community impact through effective mechanical engineering.
4.    Cultivate an engaging and dynamic learning environment for mechanical engineering students.

Program Learning Outcomes
Knowledge and Understanding
K1		Demonstrate knowledge and comprehension with both breadth and depth in the underlying theories, principles, and concepts of Fundamentals of Mechanical Engineering and basic Science.
K2		Demonstrate knowledge and comprehension with both breadth and depth in the underlying theories, principles, and concepts of Energy, Thermal, Fluid, Mechatronics and Control Systems.
K3		Demonstrate knowledge and comprehension with both breadth and depth in the underlying theories, principles, and concepts of Materials, Design, Manufacturing and Mechanical Systems
Skills
S1	Identify, formulate, and solve complex engineering problems by applying principles of mechanical engineering, science, and mathematics.
S2	Apply engineering design to produce solutions that meet specified needs with consideration of public health, safety, and welfare, as well as global, cultural, social, environmental, and economic factors.
S3	Develop and conduct appropriate experimentation, analyze and interpret data, and use engineering judgement to draw conclusions.
S4	Communicate effectively with a range of audiences.
S5	Create, select, adapt and apply appropriate techniques, resources and modern engineering and IT tools to solve complex engineering problems with understanding of the limitations
S6	Identify and evaluate the issues and constraints of sustainability, economy, environment, politics, health and safety, and society that are relevant to professional solving of complex engineering problems
Values, Autonomy, and Responsibility
V1	Recognize ethical and professional responsibilities in engineering situations and make informed judgements, which must consider the impact of engineering solutions in global, economic, environmental, and societal contexts.
V2	Function effectively on a team, whose members together provide leadership, create a collaborative and inclusive environment, establish goals, plan tasks, and meet objectives.
V3	Develop and conduct appropriate experimentation, analyze and interpret data, and use engineering judgement to draw conclusions.

**Curriculum Structure**
Program Structure	Required/ Elective	No. of courses	Credit Hours	Percentage
Institution Requirements	Required	10	26	15.85%
Institution Requirements	Elective	5	13	7.93%
College Requirements	Required	12	35	21.34%
College Requirements	Elective	0	0
Program Requirements	Required	28	76	46.34%
Program Requirements	Elective	2	6	3.66%
Capstone Course/Project		2	5	3.05%
Field Training/ Internship		1	3	1.83%
Residency year				-
Others				-
Total		60	164	100

Program Courses
Level	Course	Course Title	Required	Pre-Requisite	Credit	Type of requirements (Institution, College, or Program)
Level	Code	Course Title	or Elective	Courses	Hours	Type of requirements (Institution, College, or Program)
Level 1	ARAB1101	Arabic Language Skills مهارات اللغة العربية	Required	-	2	Institution
	CID1101	Communication Skills مهارات الاتصال	Required	-	2	Institution
	CSC1102	Problem Solving in Computing حل المشكلات بالحوسبة	Required	-	3	Institution
	ELS1101	English(1) اللغة الإنجليزية (1)	Required	-	3	Institution
	MATH1101	Introduction to Mathematics مقدمة في الرياضيات	Required	-	3	Institution
	PHYS1101	Fundamentals of Physics أساسيات الفيزياء	Required	-	3	College
المجموع					16
Level 2	EDUF1102	Critical Thinking Skills and its Modern Applications مهارات التفكير الناقد وتطبيقاته المعاصرة	Required	-	3	Institution
	ELS1102	English (2) اللغة الإنجليزية (2)	Required	ELS1101	3	Institution
	ISLS1101	Islamic Culture between Authenticity and Contemporary الثقافة الاسلامية بين الاصالة والمعاصرة	Required	-	2	Institution
	MATH1102	Differential Calculus حساب التفاضل	Required	MATH1101	3	Institution
	GEE_T	General Technical Elective اختياري التقنية	Elective	-	3	Institution
	GEE_L	General Linguistics Elective اختياري اللغات	Elective	-	3	Institution
المجموع					17
Level 3	ISLS1201	الأخلاق والقيم الحضارية في الاسلام	Required	ISLS1101	2	Institution
	LANT1203	Writing (1) كتابة (1)	Required	ELS1102	3	College
	MATH1205	Linear Algebra الجبر الخطي	Required	MATH1102	3	College
	MATH1254	Engineering Mathematics الرياضيات الهندسية	Required	MATH1102	3	College
	PHYS1251	General Physics الفيزياء العامة	Required	PHYS1101	4	College
	CHEM1101	Fundamentals of Chemistry أساسيات الكيمياء	Required	-	3	College
المجموع					18
Level 4	MCEN1201	Fundamentals of Engineering Drawing أساسيات الرسم الهندسي	Required	-	3	Program
	MCEN1202	Materials Engineering مواد هندسية	Required	CHEM1101 & MATH1205	3	Program
	CIEN1201	Statics إستاتيكا	Required	PHYS1251	2	College
	ELEN1251	Fundamentals of Electrical Engineering اساسيات الهندسة الكهربائية	Required	PHYS1251	3	College
	MATH1204	Ordinary Differential Equations معادلات تفاضلية عادية	Required	MATH1254	3	College
	ELEN1203	Engineering Strategies & Practice	Required	-	3	College
	GEE_C	General Humanitarian and Culture Elective اختياري الثقافات والانسانيات	Elective	-	2	Institution
المجموع					19
Level 5	MCEN1301	Dynamics ديناميكا	Required	CIEN1201	2	Program
	MCEN1302	Thermodynamics (1) ديناميكا حرارية (1)	Required	CHEM1101 & MATH1204	3	Program
	MCEN1303	Mechanical Drawing رسم ميكانيكي	Required	MCEN1201	3	Program
	MCEN1304	Fundamentals of Technical Engineering أساسيات التقنية الهندسية	Required	-	1	Program
	MATH1255	Multivariable Calculus حساب التفاضل والتكامل متعدد المتغيرات	Required	MATH1254	3	College
	LANT1206	Writing (2) كتابة (2)	Required	LANT1203	3	College
	GEE_S	General Science Elective اختياري العلوم الطبيعية والاجتماعيةواجتماعية	Elective	-	3	Institution
المجموع					18
Level 6	ELEN1406	Practical Engineering Essentials الأساسيات الهندسية التطبيقية	Required		1	College
	MCEN1305	Fundamentals of Design in Mechanical Engineering أساسيات التصميم في الهندسة الميكانيكية	Required	LANT1206 & ELEN1203	3	Program
	MCEN1306	Mechanics of Materials ميكانيكا المواد	Required	MCEN1301	3	Program
	MCEN1307	Fluid Mechanics ميكانيكا الموائع	Required	MCEN1301	3	Program
	MCEN1308	Manufacturing Processes أساليب التصنيع	Required	MCEN1202 & MCEN1303 &MCEN1304	3	Program
	MCEN1309	Computer Aided Design التصميم بمساعدة الحاسوب	Required	MCEN1303 & MATH1205	3	Program
	INEN1302	Engineering Economy اقتصاد هندسى	Required	MATH1205	2	College
المجموع					18
Level 7	MCEN1401	Automatic Control and Systems تحكم آلي ونظم	Required	MCEN1307 & ELEN1251	2	Program
	MCEN1402	Thermodynamics (2) ديناميكا حرارية (2)	Required	MCEN1302 & MCEN1307	3	Program
	MCEN1403	Mechanics of Machines ميكانيكا الآلات	Required	MCEN1301, MCEN1306	3	Program
	MCEN1404	Numerical Analysis Applications in Mechanical Engineering تطبيقات الطرق العددية في الهندسة الميكانيكية	Required	MATH1255, MCEN1307	3	Program
	MCEN1405	Mechanical Design (1) تصميم ميكانيكي (1)	Required	MCEN1309 & MCEN1305	3	Program
	INEN1307	Engineering Project Management إدارة المشاريع الهندسية	Required	INEN1302	3	College
	GEE_P	General Elective اختياري التطوير المهني والشخصي	Elective	-	2	Institution
المجموع					19
Level 8	MCEN1406	Heat Transfer انتقال الحرارة	Required	MCEN1402	3	Program
	MCEN1407	Mechanical Vibrations إهتزازات ميكانيكية	Required	MCEN1403	3	Program
	MCEN1408	Basic Hydraulics and Pneumatic Systems أساسيات المنظومات الهيدروليكية والنيوماتية	Required	MCEN1401	3	Program
	MCEN1409	Mechatronics ميكاترونيات	Required	MCEN1401	2	Program
	MCEN1410	Instrumentation and Measurements قياسات ومعدات	Required	MCEN1404 & MCEN1401	2	Program
	MCEN1411	Mechanical Design (2) تصميم ميكانيكي (2)	Required	MCEN1405	3	Program
	MCEN1498	Project مشروع	Required	Department Approval	2	Program
المجموع					18
Level 9	MCEN1412	Power and Desalination Plants محطات الطاقة وتحلية المياه	Required	MCEN1406	3	Program
	MCEN1413	Refrigeration and Air Conditioning تبريد وتكييف الهواء	Required	MCEN1408	3	Program
	MCEN1414	Turbomachinery آلات توربينية	Required	MCEN1411	3	Program
	MCENxxxx	Elective (1) اختياري (1)	Elective		3	Program
	MCENxxxx	Elective (2) اختياري (2)	Elective		3	Program
المجموع					18
Level 10	MCEN1495	Training تدريب	Required	Department Approval	3	Program
المجموع					3

Elective Courses
Level	Course	Course Title	Required	Pre-Requisite	Credit	Type of requirements
Level	Code	Course Title	or Elective	Courses	Hours	(Institution, College, or Program)
elective	MCEN1416	Heating Ventilation and Air Conditioning Systems (HVAC) منظومات تسخين و تبريد الهواء و التهوية	Elective	MCEN1406	3	Program
	MCEN1417	Pipelines Engineering هندسة خطوط الانابيب	Elective	MCEN1411	3	Program
	MCEN1418	Renewable Energy Systems منظومات الطاقة المتجددة	Elective	MCEN1402	3	Program
	MCEN1419	Advanced Fluid Mechanics ميكانيكا الموائع المتقدمة	Elective	MCEN1406 & MCEN1307	3	Program
	MCEN1420	Advanced Turbomachinery آلات توربينية متقدمة	Elective	MCEN1408	3	Program
	MCEN1421	Internal Combustion Engines آلات احتراق داخلي	Elective	MCEN1402	3	Program
	MCEN1422	Materials Selection for Design اختيار المواد للتصميم	Elective	MCEN1411	3	Program
	MCEN1423	Numerical Control Machines التحكم العددي في ماكينات التشغيل	Elective	MCEN1409	3	Program
	MCEN1424	Finite Elements Method and Applications in Design طريقة العناصر المحدودة و تطبيقات في التصميم	Elective	MCEN1411	3	Program
	MCEN1425	Fault Diagnoses and Failure Analysis in Mechanical Systems تشخيص الأعطال و الفشل في تحليل الأنظمة الميكانيكية	Elective	MCEN1411	3	Program
	MCEN1426	Composite Materials المواد المركبة	Elective	MCEN1411	3	Program
	MCEN1427	Corrosion Engineering هندسة التآكل	Elective	MCEN1411	3	Program
	MCEN1428	Aircraft Propulsion Systems منظومات الدفع للطائرات	Elective	MCEN1408	3	Program
	MCEN1429	Design of Thermal-Fluid Systems تصميم منظومات الحرارة و الموائع	Elective	MCEN1402	3	Program
	MCEN1430	Robotics Engineering هندسة الروبوتات	Elective	MCEN1409	3	Program
	MCEN1431	Materials and Process Selection المواد و أسلوب الاختيار	Elective	MCEN1411	3	Program
	MCEN1432	Selected Topics in Mechanical Engineering (1) موضوعات مختارة في الهندسة الميكانيكية (1)	Elective	Department Approval	3	Program
	MCEN1433	Selected Topics in Mechanical Engineering (2) موضوعات مختارة في الهندسة الميكانيكية (2)	Elective	Department Approval	3	Program

Mechanical Engineering

University Requirements:

Program Requirements:

Program Mission:

Program Goals:

Program Learning Outcomes

Knowledge and Understanding

Skills

Values, Autonomy, and Responsibility

Follow Us on

Accessibility tools